Zodiac Power Force handleiding
Handleiding
Je bekijkt pagina 34 van 128
15
Display of Possible causes Soluons Reseng
ST5 sensor error
compressor discharge
sensor
Sensor is faulty or oine (J7-A1
connector)
Reconnect or change the sensor
By electricity
supply
disconnecon or
automac if the
fault disappears
Communicaon
fault between the
regulaon board and
the display board
Bad connecon between the A1
and A2 boards
Check the J8, J9, J7 and J4-
J5 connectors on the link cable
between the boards
By electricity
supply
disconnecon or
automac if the
fault disappears
Board power supply fault
Check the boards' power supply
Faulty boards
Replace the boards
Venlaon command
fault
Lack of informaon on the fan
speed
Call an approved technician
Cut power or press
Communicaon fault
with the A3 venlaon
board
Poor connecons
Check the connecons
By electricity
supply
disconnecon or
automac if the
fault disappears
Power supply fault
Check the power supply
Incorrect conguraon
Check the posion of switches
SW1 and SW2 and the JPC bridge
Board out of service
Replace the board
4.3 I Addional menus
To access the menu, press .
To browse the menus and modify the values, press or
To exit the menu, press .
You may consult the latest faults:
You may read the values measured by the sensors and the operaon of the electronic valve and the fan.
Water temperature on intake
Air temperature
Defrost sensor
Fluid line sensor
Compressor discharge temperature
Opening of electronic valve
Fan operang speed
EN
Bekijk gratis de handleiding van Zodiac Power Force, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Zodiac |
| Model | Power Force |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 28463 MB |
