Zodiac HPO handleiding
Handleiding
Je bekijkt pagina 13 van 28
12
• Reduce the temperature setpoint to below the water temperature to check that the heat pump stops operang.
• Switch o the heat pump by pressing and check that it stops.
2.4 I User funcons
2.4.1 "Automac keypad lock" funcon
The "automac keypad lock" funcon allows the keypad to be disabled when inacve for a certain period of me to
prevent mishandling.
Locking/unlocking the keypad:
• Press + simultaneously for 5 seconds.
The indicator appears (= locked) or disappears (= unlocked) depending on the keypad's state.
2.4.2 Changing operang mode
The heat pump can operate in "HEATING", "COOLING" or "HEATING & COOLING" (automac regulaon) mode.
Informaon: "HEATING" mode
• When "HEATING" mode is selected, the heat pump heats the pool water to the temperature setpoint.
• The heat pump stops automacally once the temperature setpoint is reached.
Informaon: "COOLING" mode
• When "COOLING" mode is selected, the heat pump cools the pool water to the temperature setpoint.
• The heat pump stops automacally once the temperature setpoint is reached.
Informaon: "HEATING & COOLING" mode (automac regulaon)
• When the "HEATING & COOLING" operang mode is selected, the heat pump automacally switches to
"HEATING" mode (if the water temperature falls ≤ -1°C below the temperature setpoint) or to "COOLING"
mode (if the water temperature rises ≥ +2°C above the temperature setpoint) in order to maintain the
pool at the temperature setpoint.
Example: When the temperature setpoint is 28°C, if the water temperature rises to 30°C, the heat
pump will automacally switch to "COOLING" mode to return to the temperature setpoint. If the water
temperature falls to 27 °C, the heat pump will automacally switch to "HEATING" mode to return to the
temperature setpoint.
To switch to "HEATING", "COOLING" or "HEATING & COOLING" (automac control) mode:
• Press for 5 seconds to select "HEATING", "COOLING" or "HEATING & COOLING" (automac regulaon) mode.
The corresponding indicator lights up to indicate the mode selected.
In "HEATING & COOLING" mode (automac regulaon), the 2 indicators and are lit.
2.4.3 Conguring the temperature setpoint
Begin by selecng the desired operang mode: "HEATING" , "COOLING" or "HEATING & COOLING" (automac
regulaon) using the key.
• Press or , the setpoint value of the previously selected operang mode will ash.
• Press to increase the temperature by 1°C,
• Press to reduce the temperature by 1°C.
• Press to conrm and exit "conguraon" mode.
EN
Bekijk gratis de handleiding van Zodiac HPO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Zodiac |
| Model | HPO |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6991 MB |
