Zodiac Heat Line handleiding
Handleiding
Je bekijkt pagina 9 van 17
8
2.3 I Electricity supply connecons (depending on the model)
• Incorrectly ghtened terminals may cause the terminal unit to heat up and invalidate the
warranty.
• The appliance must be connected to an earth socket.
• Before any work inside the appliance, you must cut the electricity supply as there is a risk of
electric shock which may cause material damage, serious injury or even death.
• Only a qualied and experienced technician is authorised to carry out cabling work within the
appliance or to replace the power cord.
• The exchanger's electrical supply must be provided through a protecon and circuit breaking device (not supplied)
complying with the standards and regulaons in force in the country where it is installed.
• Electrical protecon: via 30 mA residual-current circuit breaker.
• The power supply must correspond to the voltage indicated on the appliance's informaon plate.
• Use the power cord delivered with the appliance.
• All extension cables or mulsocket connects are prohibited. Request the installaon of a protected power socket near
the appliance from a qualied technician.
• If the power cord is not long enough, it must be replaced by a qualied technician.
• The power cord must not be exposed to elements that are sharp, hot or represent a crush hazard.
• The electrical connecon lines must be xed.
2.3.1 Connecng an external command to supply the primary circuit
• This funcon is provided via the dry contact without polarity "normally open at rest" (maximum intensity 5A under
250Vac 50-60Hz) available on the terminal 19-20 regulator,
• Use a 3G1 cable (secon 1 mm²),
• The wire connected to terminals 19-20 must go through the addional discharge “grommet” (supplied) to be installed
on the base of the box.
Ph: live
N: neutral
F*: protecon fuse
(5A maximum)
C*: addional circulang
pump
V’*: 3-way valve with
mechanical return
CH*: exisng heang source
V’’*: motorised 3-way valve
with two rotaon direcons
KA1*: command relay
* not included
Connecon to a heang source Connecon to a circulang pump
Connecon to a 3-way valve with
mechanical return
Connecon to a motorised 3-way valve
with two rotaon direcons
EN
Bekijk gratis de handleiding van Zodiac Heat Line, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Zodiac |
| Model | Heat Line |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3817 MB |
