Zodiac GenSalt OT handleiding
Handleiding
Je bekijkt pagina 44 van 60
42
5.3.2 Con guring the pH setpoint
Current sensor measurements
Setpoints
The pH setpoint con gura on determines the me when acid is added to the system to reduce the water's pH. The
default value of the pH setpoint is 7.2.
To determine the value of the setpoint to be con gured, refer to Taylor's balance, see “4.1.3 Weekly analyses”.
• Press and browse the menu using the bu ons. Press to con rm.
• Select the desired setpoint value (from 6.8 to 7.6):
Principle of injec ng pH into the appliance:
Example of 4 cycles with a setpoint at 7.4 pH and acid regula on (standard alkalinity):
• pH ≥ 7.55: 20% injec on (2 min) & 80% pause (8 min)
• pH ≥ 7.7: 50% injec on (5 min) & 50 % pause (5 min)
• pH ≥ 7.85: 75% injec on (7 min 30 sec) & 25% pause (2 min 30 sec)
• pH > 7.9: 100% injec on (10 min)
Changes in the pool's pH
Dispensing
cycle mes
pH setpoint - 7.4
Bekijk gratis de handleiding van Zodiac GenSalt OT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Zodiac |
| Model | GenSalt OT |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 20621 MB |
