Handleiding
Je bekijkt pagina 20 van 42
20
Printing a Test (Printer Configuration) Label
Before you connect the printer to your computer, make sure that the printer is in proper working
order.
You can do this by printing a configuration status label.
1. Make sure the media is properly loaded and the top cover of the printer is closed. Then, turn the
printer power on if you have not already done so. If the printer initializes with the status light
blinking green (pause mode), press the Feed button once to set the printer in Ready (to print)
mode. See the Troubleshooting if the printer’s status light does not turn solid green (Ready).
2. Press the Feed button two to three times to allow the printer to calibrate the printer for the installed
media. The printer may feed several labels during this process.
3. When the status light is solid green, press and hold the Feed button until the status light flashes
once.
4. Release the Feed button. A configuration label will print.
If you cannot get this label to print, refer to Troubleshooting.
.
Bekijk gratis de handleiding van Zebra ZD120, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Zebra |
| Model | ZD120 |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 3723 MB |
