Yard Force YF5515LT handleiding
Handleiding
Je bekijkt pagina 13 van 17
13
5. Move the product slowly from side to side in a swinging motion.
6. Ensure the cutting device remains clean and free from debris that may cause it to jam. Check regularly.
Release the on/ off switch and disconnect the product from the power supply before checking.
7. Trim longer grass in stages; do not cut long grass in one cut. For the best results, cut longer grass in
steps.
8. For edging mode, place the trimmer along the edge of the lawn, resting on the wheel.
9. Turn product on and push the trimmer forward slowly, letting the wheel guide you while edging the lawn.
TIPS
1. For best results, do not cut wet grass because it tends to stick to
the cutting head and guard, prevents proper discharge of grass
trimmings, and could cause you to slip and fall.
2. Do not allow the spool cover to drag on the ground or other
surfaces.
3. Pay special attention when performing the work close to trees
and bushes (Fig.17). The cutting head could damage sensitive
bark, and damage fence posts.
4. Fold the plant protector out to avoid bringing the cutting device into contact with hard objects such as
walls and curbs.
NOTE: The trimming line will wear faster and require more feeding
if the cutting or edging is done along sidewalks or other abrasive
surfaces or heavier weeds are being cut.
OPERATION
Fig.17
Fig.15 Fig.16
Bekijk gratis de handleiding van Yard Force YF5515LT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Yard Force |
| Model | YF5515LT |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1584 MB |