Yard Force YF5515LT handleiding
Handleiding
Je bekijkt pagina 12 van 17
12
OPERATION
TILT ADJUSTMENT (Fig.11)
conditions.
1. Press the tilt adjustment pedal down with your foot.
2. Adjust the angle of the pole, up or down.
3. Release the unlock pedal and keep moving the pole until it locks in
place.
NOTE: Always ensure that the pedal snaps into place after adjusting
the trimmer in one of the three positions!
AUTOMATIC LINE FEEDING
The equipment features a fully automatic dual line system.
The lines will automatically elongate every time you turn on the appliance. To support proper line elongation,
ensure that the coil has stopped moving completely before turning on the appliance again.
The lines are automatically cut to the correct length by the line cutter.
TRIM GUARD (Fig. 12)
or other objects that could be hit by the cutting device.
1. Fold the trim guard out for trimming / edging operation.
2. Fold the trim guard in for storage.
WARNING! Adjust the trim guard position only when the
product is switched off and the cutting device is at a
complete stop!
SWITCHING ON/OFF (Fig. 13)
1. Press the on/off switch (3) to turn the product on.
2. Release the on/off switch (3) to turn the product off.
TRIMMING (Fig. 14, 15 & 16)
1. Ensure the blade shipping cover is removed before use.
Ensure you wear gloves when removing this cover.
2. Adjust the trimmer head angle to 0° for trimming operation.
3.
feet slightly apart. Alter the height of the product if needed
to ensure an upright posture.
4. Hold the trimmer head just above the ground at an angle of
approximately 30°.
30
o
Fig.11
Fig.12
Fig.14
Fig.13
ON/OFF SWITCH
Bekijk gratis de handleiding van Yard Force YF5515LT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Yard Force |
| Model | YF5515LT |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1584 MB |