Yard Force YF5515LT handleiding
Handleiding
Je bekijkt pagina 11 van 17
11
OPERATION
GENERAL OPERATION
NOTE:
1. Check the power cord, plug and accessories for damage before each use. Do not use the
product if it is damaged or shows wear.
2.
3. Always hold the product by its handles. Keep handles dry to ensure safe support.
HEIGHT ADJUSTMENT (Fig.7)
1. Loosen the locking sleeve (6) counterclockwise.
2.
3. Tighten the locking sleeve counterclockwise.
FRONT HANDLE ADJUSTMENT (Fig.8)
Loosen the knob (11) and move the forward
handle (5) up or down.
Tighten the knob to secure the forward handle
into the adjusted position.
1.
2.
EDGING MODE (Fig. 9 & 10)
1. Adjust the trimmer head to 90° for edging by pressing the locking button (13).
2. Turn the head 90°.
3. Twist the plant guard to an angle of 90°.
WARNING!
The tool runs for approximately 5 seconds after it has been switched off.
Let the motor come to a complete standstill before setting the tool down.
WARNING!
Ensure product is switched off and disconnected from the power supply when
Fig.7
Fig.8
Fig.9 Fig.10
Adjust the angle of the front handle to ease operation
prevent loss of control.
Bekijk gratis de handleiding van Yard Force YF5515LT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Yard Force |
| Model | YF5515LT |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1584 MB |