Yamaha Rio3224-D3 handleiding
Handleiding
Je bekijkt pagina 38 van 44
Appendix
Rio3224-D3 Rio1608-D3 Reference Manual
38
Error messages
Warning messages
“***” represents the conflicting network address.
Information messages
Confirmation messages
Message Description Possible solution
HAAD HARD ERROR! A problem with HAAD was
detected.
If the problem persists, contact your
Yamaha dealer.
Message Description Possible solution
DANTE DEVICE LOCK IS ENABLED! You may have attempted to change
this unit’s UNIT ID or a Dante
setting such as SECONDARY
PORT while Dante Device Lock
was enabled.
Use Dante Controller to defeat
Dante Device Lock.
DANTE DDM LOCAL POLICY IS READ
ONLY!
You may have attempted to change
this unit’s UNIT ID or a Dante
setting such as SECONDARY
PORT while Local Policy in DDM
was set to Read Only.
Use the DDM setting application to
defeat Read Only for Local Policy.
IP ADDRESS DUPLICATED The same IP addresses exist on the
network.
(This message is not supported in
V1.0.)
Resolve the IP address conflict.
SAME NET ADDR! (NW PORT & DNT
PORT ***)
There is a network address conflict
between the network port and the
Dante port.
Resolve the network address
conflict.
SAME NET ADDR! (NW PORT & DNT
PRI ***)
There is a network address conflict
between the network port and the
PRIMARY port.
Resolve the network address
conflict.
SAME NET ADDR! (NW PORT & DNT
SEC ***)
There is a network address conflict
between the network port and the
SECONDARY port.
Resolve the network address
conflict.
SAME NET ADDR! (DNT PORT & NW
PORT ***)
There is a network address conflict
between the Dante port and the
network port.
Resolve the network address
conflict.
SAME NET ADDR! (DNT PORT & DNT
PRI ***)
There is a network address conflict
between the Dante port and the
PRIMARY port.
Resolve the network address
conflict.
SAME NET ADDR! (DNT PORT & DNT
SEC ***)
There is a network address conflict
between the Dante port and the
SECONDARY port.
Resolve the network address
conflict.
Message Description
FRONT PANEL LOCKED Panel Lock is now enabled.
FRONT PANEL LOCKED Panel Lock has been enabled.
FRONT PANEL UNLOCKED Panel Lock is now disabled.
REMOTE ONLY
LOCAL CONTROL IS DISABLED
The parameters for the INPUT/OUTPUT channels are read-only.
AUDIO MUTED
NO SYNC WITH MIXER OR APP
Muted.
DAISY CHAIN
SECONDARY PORT
The SECONDARY port has been set to DAISY CHAIN.
FACTORY INITIALIZE ACCEPTED! Initialization of the unit (restoring the factory settings) has begun.
Message Description
FACTORY PRESET INITIALIZE? Initialize the unit (restore the factory settings)?
INITIALIZE DONE. REBOOT? Finished initializing the unit (restoring the factory settings). Restart the
unit?
CURRENT PARAMETERS INITIALIZE? Start initializing the HA and OUPUT parameters?
DANTE SETTINGS INITIALIZE? Start initializing the Dante settings?
Bekijk gratis de handleiding van Yamaha Rio3224-D3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Yamaha |
| Model | Rio3224-D3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5838 MB |
