Yaesu VR-5000 handleiding
Handleiding
Je bekijkt pagina 38 van 64
VR-5000 OPERATING MANUAL36
M-S SCAN
This feature allows you to sub-band limits scanning between the MAIN VFO frequency
and SUB VFO frequency.
1. Press the
[
V/M
(
MW
)]
key to recall the VFO mode, if necessary.
2. Press the
[
F
]
key momentarily, then press the
[
SCAN
(
M-S SCAN
)]
key to initiate
scanning in an upward direction between the MAIN VFO frequency and SUB VFO
frequency.
3. If the scanner encounters a signal strong enough to open the squelch, the scanner will
halt and pause on that frequency.
4. To reverse the direction of the scan (i.e. toward a lower frequency, instead of a higher
frequency), turn the DIAL knob one click in the counter-clock direction or press the
[
T
(
W
)]
key momentarily while the VR-5000 is scanning. To revert to scanning toward
a higher frequency once more, rotate the DIAL knob one click clockwise or press the
[
S
(
X
)]
key momentarily.
5. Press the
[
SCAN
(
M-S SCAN
)]
key to disable the M-S Scan, and return to the VFO
mode.
Setting the dwell timers for the Scanner
You can customized the dwell timers for the Scanner.
1. Press the
[
F
]
key momentarily, then press the
[
ENT
(
SET
)]
key.
2. Rotate the DIAL knob to select the cursor to the “
SCAN TMSCAN TM
SCAN TMSCAN TM
SCAN TM” menu, then press the
[
ENT
(
SET
)]
key.
3. Rotate the DIAL knob to select the desired timer (menu) to be you wish changing.
M-DELAYM-DELAY
M-DELAYM-DELAY
M-DELAY: Determine the scan resume duration when signal is disappeared.
M-PAUSEM-PAUSE
M-PAUSEM-PAUSE
M-PAUSE: Determine the scanning pause time on activity before resuming.
M-P.DELAYM-P.DELAY
M-P.DELAYM-P.DELAY
M-P.DELAY: Determine the scan resume duration when the signal is disappeared while
the
M-PAUSEM-PAUSE
M-PAUSEM-PAUSE
M-PAUSE timer is activated.
M-HOLDM-HOLD
M-HOLDM-HOLD
M-HOLD: Determine the scanning pause time when signal is received. If the scan-
ner stops until this time, the scanner turns to off.
M-H.DELAYM-H.DELAY
M-H.DELAYM-H.DELAY
M-H.DELAY: Determine the scan resume duration when the signal is disappeared while
the
M-HOLDM-HOLD
M-HOLDM-HOLD
M-HOLD timer is activated.
4. Rotate the DIAL knob to change the value for the timer, then press the
[
ENT
(
SET
)]
key.
5. Rotate the DIAL knob to select the cursor to the “
ENDEND
ENDEND
END” menu, then press the
[
ENT
(
SET
)]
key.
6. Confirm that the cursor is on the “
WRITEWRITE
WRITEWRITE
WRITE” menu, then press the
[
ENT
(
SET
)]
key to
save the new setting and exit to the normal operation.
Scanning
Bekijk gratis de handleiding van Yaesu VR-5000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Yaesu |
| Model | VR-5000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8268 MB |
