Wiesenfield WIE-BM-100 handleiding
Handleiding
Je bekijkt pagina 31 van 228
EN
Operation in the presence of high humidity
In the event of heating elements becoming damp, operating in a humid environment, or due to moisture inside
the outlet sleeve, the safety feature may activate and the machine will automatically shut down. Moisture on
heated elements can cause damage to them.
Solution: Before regular operation, connect two or three heating elements in series, link them to the rated
voltage, and activate the power 1-2 hours in advance.
Troubleshooting
Serial
number
Problem Possible cause Solution
1
The power
indicator is off
1) Power is not connected
2) Blown fuse
3) Defective indicator light
1) Connect the power
2) Replace the fuse
3) Replace the control lamp
2
Engine will not
start.
1) Defective control button
2) Two-phase work
3) Voltage and frequency mismatch
1) Replace the button
2) Check the power cord
3) Check the voltage, frequency
3
Slow heating or
inability to reach
350 °C
1) Low supply voltage
2) Defective heater
3)
Incorrect heater heating cable
model
1) Check the voltage
2) Replace the heater
3) Replace as required
4
Overheating of the
engine
1) Overload
2) Two-phase work
3) Damaged bearing
4) Clogged ventilation duct
5) High ambient temperature
6) Low or high voltage
7)
Stator winding or phase short
circuit
1) Check if there is a fault 5
2) Check the fuse, switch, contact for
faults
3) Replace the bearings
4) Remove the obstacle
5) Cool down
6) Adjust the tension
7) Check and fix the faults
5
Briquette not
formed
1) High raw material moisture
2) Low heating temperature
3)
Material clamped in the bolt
groove
1) Dry the raw material
2) Increase the heating temperature
3)
Sharpen the worm shaft, remove
the obstruction
Bekijk gratis de handleiding van Wiesenfield WIE-BM-100, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Wiesenfield |
| Model | WIE-BM-100 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 106066 MB |
