Wiesenfield WIE-BK-62 handleiding
Handleiding
Je bekijkt pagina 14 van 67
H
inges assembly: fit the cover screw holes to the hinges and use M4*10 screws and M4 hexagonal self-locking nuts to
secure them:
Manually rotate the inner basket to check that it is working properly.
Place the unit on a hard floor and mark the areas of the circular holes in the lower parts of the feet. Once this has been done,
move the unit away.
Drill the holes (minimum diameter 10 mm, minimum depth 65 mm), drive the wall plugs into the floor (choose the type of
plugs according to the type of floor) and place the unit according to the position of the screws, then tighten the screws.
3.4. Device use
Set the ON/OFF switch to the "0"/"STOP" position; turn the speed control knob counterclockwise to the "0" position.
Plug the power cord into an AC power outlet.
Insert the frames (honeycombs) into the inner basket of the machine. Load two or four on opposite sides to keep the unit
balanced during operation.
Bekijk gratis de handleiding van Wiesenfield WIE-BK-62, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Wiesenfield |
| Model | WIE-BK-62 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 16435 MB |
