Wiesenfield WIE-BK-62 handleiding
Handleiding
Je bekijkt pagina 13 van 67
Control panel:
1 - Safety switch
2 - ON/OFF switch
3 - Speed control
3.2. Preparing for use
APPLIANCE LOCATION
The temperature of environment must not be higher than 40°C and the relative humidity should be less than 85%. Ensure
good ventilation in the room in which the device is being used. There should be at least 10 cm distance between each side of
the device and the wall or other objects. The device should always be used when positioned on an even, stable, clean,
fireproof and dry surface, and be out of the reach of children and persons with limited mental and sensory functions.
Position the device such that you always have access to the power plug. The power cord connected to the appliance must be
properly grounded and correspond to the technical details on the product label.
Disassemble the device and all its components and clean them before the first use.
3.3. Assembling the device
Legs assembly: use M8X16 bolts and serrated washers to attach the legs to the unit and tighten them firmly:
Assembling the honey valve: insert the valve into the hole in the bottom of the cylinder from the outside inwards and screw
on at the back using hexagonal nuts (pay attention to the correct seal - O-ring).
Bekijk gratis de handleiding van Wiesenfield WIE-BK-62, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Wiesenfield |
| Model | WIE-BK-62 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 16435 MB |
