Westinghouse W14TCAC handleiding
Handleiding
Je bekijkt pagina 11 van 41
English
|
11
OPERATION
WARNING
Never pass the tiller over the extension cord. Be sure that the extension cord is always in a safe position
away from the tines.
WARNING
When working on inclines, be sure to stand diagonally to the incline to retain firm, safe footing. Do not
work on extremely steep slopes.
WARNING
Be sure the area to be cleared is free of stones, sticks, wires, gravel, and other objects that could be acci-
dentally thrown by the tool in any direction and cause serious personal injury to the operator and others.
WARNING
Before transporting the tiller from one area to another, turn off the motor and wait for the tines to stop
rotating. Disconnect the tiller from the power supply. Be careful not to let the tines touch the ground while transporting the tool.
z If the unit comes in contact with any type of obstruction or debris during use, stop the tool, disconnect from the power supply,
remove the obstruction, and inspect the unit carefully for damage before proceeding.
WARNING
Never reach into the tines or place any body part in front of the tool when the unit is operating or when the
unit is plugged in. Always be sure all moving parts have stopped and the tool has been unplugged before clearing any obstruc-
tions. Failure to follow these instructions can result in serious personal injury.
z To clear the tines or the tine shaft, release the switch trigger. Wait for the tines to stop and disconnect the tool from the power supply.
Dislodge the debris from the tines or the tine shaft.
z Always wear gloves when clearing the tines or the tine shaft.
z Some parts of the tool can freeze under extreme weather conditions. Do not attempt to operate the unit with frozen parts.
z To use the tool most efficiently:
• Make two passes over the area being tilled. Make the second pass perpendicular to the first pass.
• Make two passes over the area being tilled. Make the second pass overlap the first pass.
z This tool has a path 14 in. (36 cm) wide and up to 8.7 in. (22 cm) deep in one pass.
z Keep the cord clear of obstructions, sharp objects and the rotating paddles. Do not pull sharply on the cord or abuse it in any manner.
Frequently inspect the cord for signs of damage. If damage is found, do not use the tool. Contact customer service
z Disconnect the extension cord after using the electric tool. Hang the extension cord with the tool so it will not be misplaced or damaged.
Bekijk gratis de handleiding van Westinghouse W14TCAC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Westinghouse |
| Model | W14TCAC |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3821 MB |
