Westinghouse W14TCAC handleiding
Handleiding
Je bekijkt pagina 10 van 41
10
|
English
OPERATION
WARNING
Always wear eye protection with side shields marked to comply with ANSI Z87.1. Failure to do so could
result in objects being thrown into your eyes resulting in possible serious injury.
WARNING
Do not use any attachments or accessories not recommended by the manufacturer of this product. The
use of attachments or accessories not recommended can result in serious personal injury.
WARNING
Always disconnect the tool from the power supply when assembling parts, making adjustments, cleaning,
or when not in use. This will prevent accidental starting that could cause serious personal injury.
NOTICE
Before each use, inspect the entire product for damaged, missing, or loose parts such as screws, nuts, bolts,
caps, etc. Tighten securely all fasteners and caps and do not operate this product until all missing or damaged parts are replaced.
Please contact customer service.
CONNECTING TO POWER SUPPLY
This product is designed with a cord retainer that prevents the extension cord from coming loose while in use.
1. Form a loop with the extension cord.
2. Insert the loop of the extension cord through the opening underneath the switch trigger.
3. Place the loop over the hook. Pull on the cord to reduce the slack and secure it over the hook.
4. Plug the power cord into the extension cord.
NOTE: Removing excess cord slack will help prevent the plug from loosening from the extension cord.
STARTING AND STOPPING THE TOOL
To start the motor:
WARNING
Rotating tines can cause serious injury. The tines will continue to turn for a few seconds after operating the
tool. Do not touch the rotating tines. Contact with hot components can cause severe burns. Allow the tool to cool before handling.
z Connect the tool to the power supply.
NOTICE
Always secure the extension cord to the unit by using the power cord retainer. Failure to use the power cord
retainer may result in damage to the tool and/or extension cord.
z Press and hold the lock-out button and squeeze the switch trigger.
NOTE: Once the tool is on, release the lock-out button.
To stop the motor:
z Release the switch trigger.
OPERATING TIPS
WARNING
Never use the tool on a rooftop or other unstable surface. This can result in death or serious personal
injury
WARNING
Do not wear loose clothing, scarves, or jewelry. They can be caught in moving parts and cause death or
serious personal injury.
Bekijk gratis de handleiding van Westinghouse W14TCAC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Westinghouse |
| Model | W14TCAC |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3821 MB |
