Warmup VLo Ultra-12 handleiding
Handleiding
Je bekijkt pagina 14 van 32
14
• Fit the curve panels, B, at the end of the room referring to the working
drawings. The plain panels, E,canthenbeusedinareaswhereunderoor
heating will not be installed, i.e. under kitchen units.
• Inlltheheatedareawiththestraightpanels,A.
7
Step 3 - Installing VLo Ultra-12
• Starting from the manifold
locationtthestraightservice
panels, C, following the pipe
layout shown on the working
drawings. Use the plain panels, E
where applicable.
• Curve service panels, D, can be
cut to be used to navigate around
obstacles as shown.
• For bends use the curve service
panels, D, snapping or cutting the
straight service panels at 45° and
butting them tightly together.
4
6
5
The boards can be cut using a utility knife. To prevent damage to
the pipe, remove sharp edges and burrs from the edges aluminium
pipe channels.
E
B
A
C
D
E
D
Bekijk gratis de handleiding van Warmup VLo Ultra-12, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Warmup |
| Model | VLo Ultra-12 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8703 MB |
