Warmup VLo Ultra-12 handleiding
Handleiding
Je bekijkt pagina 13 van 32
13
Step 3 - Installing VLo Ultra-12
For irregular surfaces a larger trowel notch may be required.
•Ensurethesuboorisdry,clean,
level to SR1 and free from dust or
other substances that will prevent
bonding.
•Primethesuboorinlinewith
the adhesive manufacturers
instruction.
1
• If you are planning to use a
levelling compound over Ultra-12
install Warmup perimeter
strip around the perimeter of
the room and any permanent
structurestoallowfordierential
movementbetweennishedoor
and walls.
• For bonded constructions in dry
areas a high temperature acrylic
adhesive can be used to bond the
Ultra-12panelstothesuboor.
Apply the adhesive following its
instructions.
For high temperature acrylic
adhesives a 1-1.5 mm V-notch
trowel is recommended.
Presstheboardsdownrmly
into the adhesive to create the
necessary adhesion.
• For bonded constructions in wet
or dry areas and compatible
S1orS2exibletileadhesiveis
recommended.
Apply the adhesive following its
instructions.
Forexibletileadhesivesa
6 mm square notched trowel is
recommended.
Presstheboardsdownrmly
into the adhesive to create the
necessary adhesion.
2
3A 3B
SR1
2 m < 3 mm
Bekijk gratis de handleiding van Warmup VLo Ultra-12, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Warmup |
| Model | VLo Ultra-12 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8703 MB |
