Warmup VLo Nexxa-12 handleiding
Handleiding
Je bekijkt pagina 9 van 24
9
Step 1 - Suboor considerations
To prevent excessive heat loss through the oor, Nexxa-12 may only be laid
over insulated or intermediate suboors.
The suboor must be solid, structurally sound and dimensionally stable. It
must be suitably weight-bearing when accounting for the additional load of
the system.
Ensure the suboor is prepared to an SR2 Surface Regularity. If
necessary an appropriate smoothing or levelling compound should
be applied.
The surface Nexxa-12 is being applied to must be smooth and primed
with Warmup Primer such that a clean and continuous bond can
be made. Warmup Primer requires than the suboor is dry, frost- free,
solid, weight-bearing and dimensionally stable. It must be
free from contaminants that may impede adhesion such as dust, dirt,
oil, grease, release agents, loose material or surface laitance.
If installing Nexxa-12 over Warmup Ultralight, the surface of the
Ultralight does not need priming if it is kept clean.
Where ceramic tiles are to be used, ensure that the suboor meets
the Tile Associations minimum specications.
Do not commence installation of Nexxa-12 without ensuring that the
resulting oor construction will meet the requirements of the oors
intended use and its nish.
Bekijk gratis de handleiding van Warmup VLo Nexxa-12, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Warmup |
| Model | VLo Nexxa-12 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4711 MB |
