Warmup VLo Nexxa-12 handleiding
Handleiding
Je bekijkt pagina 10 van 24
10
• If installing Warmup
®
Ultralight
over the suboor please refer
to its installation instructions.
Ultralight will help reduce the
heat up times of your system for
optimal performance. The surface
of Ultralight does not require
priming.
• Install Warmup Perimeter Strip
around the perimeter of the oor
and any penetrations to allow for
expansion and contraction of
the oor.
• Where cuts are required, turn
the Nexxa-12 upside down and
cut using a utility knife and a
straight edge.
• The suboor must be
pre-insulated unless it is an
intermediate oor.
Ensure the suboor is prepared
to an SR2 Surface Regularity. The
suboor must be smooth, dry,
frost-free, solid, suitably weight-
bearing and dimensionally stable.
Referring to its instructions, prime
the suboor and the bottom
30 mm of adjacent walls using
Warmup Primer.
1 2
3 4
Step 2 - Installing VLo Nexxa-12
Bekijk gratis de handleiding van Warmup VLo Nexxa-12, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Warmup |
| Model | VLo Nexxa-12 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4711 MB |
