Warmup VLo Nexxa-12 handleiding
Handleiding
Je bekijkt pagina 8 van 24
8
All oor nishes
1
Warmup perimeter strip
2
Floor nish
3
22 mm levelling compound
The 22 mm layer is measured from the base of the membrane. Levelling compound
used must be compatible with plastic underlayments such as Nexxa-12. The levelling
compound must be applied as a single layer.
4
Floor sensor
Tab tape the sensor to the membrane. Do not tape over the sensor tip!
5
Nexxa-12 membrane
6
Warmup Ultralight (Optional)
Adding Warmup Ultralight below the membrane can help improve the response time
of the system, particularly when installing over screed or concrete.
7
Flexible tile adhesive (Optional)
Required if installing Warmup Ultralight
8
Warmup primer
Refer to tile adhesive manufacturers instructions for priming requirements
9
Suboor with a surface regularity of SR2
*
*
If installing the optional Warmup Ultralight, refer to its installation manual for its sub
oor requirements.
Typical oor build-up
2
3
4
1
6
5
7
8
9
Bekijk gratis de handleiding van Warmup VLo Nexxa-12, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Warmup |
| Model | VLo Nexxa-12 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4711 MB |
