Warmup 7iE Matter handleiding
Handleiding
Je bekijkt pagina 15 van 22
15
Advanced settings Temperature
limits
Set Min./Max. settable temperature limits
Overheat limit Set Overheat air limit if oor sensor has
been installed
Control Period Set between 10 - 60 mins.
Control period checks the dierence in the current measured
temperature and the set temperature in a proportional integral
algorithm to maintain a steady temperature.
About Details about the 7iE’s current rmware,
MAC address and WiFi connection
information.
Display is blank Brightness 1. Check that the standby brightness is not
set to O.
Power 2. (Electrician Required) Electrician
required to verify power is going to the 7iE
and that it is correctly wired.
ER1 Sensor Error (Electrician Required) Electrician required
to verify that the oor sensor has been
wired correctly. If it is correctly wired
the electrician will need to check the
resistance of the oor sensor using a multi
meter. For temperatures between 20°C
- 30°C the resistance of the oor sensor
should measure between 8K ohms and
12K ohms.
If the electrician nds a fault, and the 7iE is
in the room to be heated then it can be set
into “Air Mode”.
To set into “Air Mode”, go to Sensors &
Application in Advanced Settings and
switch the probe o.
Heating is coming
on earlier than
programmed times
Adaptive
learning On
Adaptive learning will use the historic
heating/cooling rates for the time of
day, historic external temperatures and
the forecast external temperatures, to
work out the heating start time in order
to reach the comfort time at the start of
the comfort period. It will only work in
Program Mode.
Cannot to set above a
certain temperature
Floor Type
Temperature
Limits
Delicate oor coverings need to have their
temperatures limited. If the nished oor
is set for wood, laminate, vinyl etc. you are
unable to set the temperature above 27°C.
WiFi Error Symbol WiFi not setup If you have not done so, download
the MyHeating App, go to Settings and
Network setup and follow the on screen
instructions to connect to a WiFi Network.
WiFi
disconnected
Follow the step above to try and to
re-connect to the WiFi Network.
If the 7iE still fails to connect, see WiFi
Troubleshooting.
Clock Sync Icon Time and Date
not set
Connect the 7iE to a WiFi network or
alternatively set the time and date from
the settings menu.
Advanced Settings
Troubleshooting
Bekijk gratis de handleiding van Warmup 7iE Matter, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Warmup |
| Model | 7iE Matter |
| Categorie | Thermostaat |
| Taal | Nederlands |
| Grootte | 4000 MB |
