Wachendorff WDGA 58F handleiding
Handleiding
Je bekijkt pagina 36 van 79
Technical Manual
WDGA with EtherNet/IP
4 - EtherNet/IP
© Wachendorff Automation GmbH & Co. KG
28
44
Alarms
WORD
R
An alarm is set when a
malfunction bit is set to true. The
alarm remains active until it is
cleared, and the device is able to
operate correctly again.
Bit 0: Position Error
Bit 1: Diagnostic Error
Bit 2...11: reserved
Bit 12...15: manufacturer
specific
45
Supported Alarms
WORD
R
Contains the information about
the supported alarms of the
device.
Bit 0: Position Error
Bit 1: Diagnostic Error
Bit 2...11: reserved
Bit 12...15: manufacturer
specific
46
Alarm Flag
BOOL
R
The flag indicates whether an
alarm error has occurred. It
corresponds to a logical OR of
all alarm bits of attribute 44
47
Warnings
WORD
R
The warnings indicate when
certain parameters of the device
are not adhered to or when limit
values are exceeded.
All warnings are deleted as soon
as the parameters are back in
the normal range.
Bit 0: Frequency exceeded
Bit 10: Position Limits exceeded
Bit 11...12: reserved
Bit 13...15: manufacturer-
specific
48
Supported
Warnings
WORD
R
This attribute contains
information about the supported
warnings of the device.
Bit 0: Frequency Exceeded
Bit 10: Position Limits Exceeded
Bit 11...12: reserved
Bit 13...15: manufacturer
specific
49
Warning Flag
BOOL
R
This flag signals when a warning
error has occurred. It
corresponds to a logical OR of
all alarm bits of attribute 47.
Bekijk gratis de handleiding van Wachendorff WDGA 58F, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Wachendorff |
| Model | WDGA 58F |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11849 MB |
