Vulcan C24EO3AF handleiding
Handleiding
Je bekijkt pagina 14 van 43
Fig. 23
2. Install heating element assembly onto bottom of
cavity.
3. Place fender washer and loading spring
(belleville) over each mounting stud. Thread
brass nut onto stud but hand tighten only.
Fig. 24
4. Torque each mounting nut in sequence shown
below to 48-52 in-lbs.
Fig. 25
5. Apply thermal transfer compound between high
limit bulb and heating element assembly.
6. Mount high limit thermostat bulb to element
assembly.
7. Install heating element cover.
8. Install bottom panel and left leg
9. Install support channels to bottom panel.
10. Install drain pivot bracket to bottom panel.
11. Install drain handle to drain lever.
12. Remove 2x4 block under the cavity.
13. Install rear panel.
14. Connect hose from vent pipe.
15. Place steamer on its legs.
16. Connect lead wires to 1CON and 2CON in noted
positions.
17. Install left and right side panels.
18. Check steamer for proper operation.
C24EO SERIES ELECTRIC COUNTERTOP STEAMERS - REMOVAL AND REPLACEMENT OF PARTS
F25386 Rev. C (0421) Page 14 of 43
Bekijk gratis de handleiding van Vulcan C24EO3AF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vulcan |
| Model | C24EO3AF |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15986 MB |
