Voltcraft EL-1400 handleiding
Handleiding
Je bekijkt pagina 14 van 38
1
Load
current
Load voltage
Setting
current
Figure 4.3.1-1 CC mode: The Voltage-Current Relationship Diagram
Figure 4.3.1-2 CC mode operation interface
There are two ways to set the output current (CC mode):
Mode one:
1. Press MODE and rotary the knob to select CC mode, press Enter to save.
2. Press Enter key to edit the current setting, use the numeric 0-9 softkey to
set desired current, or turn the knob to adjust directly to the set value.
Press Enter key to save current setting.
3. Press ON/OFF key to output the setting current.
Mode two：
1. Press CC , at the same time, the user interface will switch into CC mode.
2. Press Enter key to edit the current setting, u use the numeric 0-9 softkey
to set desired current, or turn the knob to adjust directly to the set value.
Bekijk gratis de handleiding van Voltcraft EL-1400, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Voltcraft |
| Model | EL-1400 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4048 MB |
