Vivolink VLVWIP2000-DEC handleiding
Handleiding
Je bekijkt pagina 16 van 34
5.2 Decoder Panel
6
1 2
4
5
7
3
18
17
8
9
16
11
19
13
1415
12
10
C2C: The eARC/ARC or S/PDIF audio from the Decoder is transmitted back to the
HDMI IN or SPDIF OUT port of the Encoder.
A2A: The analog audio embedded in the Decoder is transmitted back to the AUDIO
OUT analog audio port of the Encoder.
Note:
(1) The audio return mode can not be modified through front panel buttons in
Controller Box or Multicast mode.
(2) Only when both the Encoder and Decoder are correspondingly set to C2C/A2A
audio return mode in unicast mode, the audio return can be realized.
(3) The A2A audio return mode is available only in unicast mode.
(4) When to use ARC, ARC audio amplifier on Encoder HDMI IN port and ARC TV on
Decoder HDMI OUT port should be used.
When to use eARC, eARC audio amplifier on Encoder HDMI IN port and eARC TV
on Decoder HDMI OUT port should be used.
(5) After entering various setting modes, you can hold down the DOWN button to exit
the current interface quickly, or if you do not perform any operation within 5
seconds, it will automatically return to the previous interface.
10 / 27
No. Name Function Description
2
POWER LED
(Red)
1 RESET
▪ Light on: The system is powered on (with POE or DC power
supply).
▪ Light off: The system is powered off (without POE or DC power
supply).
After powering on the device, press and hold the RESET
button until the POWER LED and LINK LED flash at the same
time, release the button to reset the device to factory settings.
JPEG2000 AVoIP Encoder and Decoder
Bekijk gratis de handleiding van Vivolink VLVWIP2000-DEC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vivolink |
| Model | VLVWIP2000-DEC |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1508 MB |
