Vivolink VLVWIP2000-DEC handleiding
Handleiding
Je bekijkt pagina 15 van 34
9 / 27
8, IP mode settings: After entering the configuration mode, press the UP/DOWN button
to enter the fifth page with “IP1/IP2/IP3” displaying on the LED screen (IP3 by default).
Press and hold UP + DOWN buttons for 5 seconds, then release to enter the settings
mode, in which the IP mode (IP1/IP2/IP3) on the LED screen will flash at 1Hz, then
press the UP/DOWN button to select the mode, then press and hold UP + DOWN
buttons for 5 seconds to confirm the setting and stop flashing. After setting, the unit
will reboot automatically.
The corresponding IP mode options are as follows:
IP1: Static IP mode (Default IP address: 169.254.100.254)
IP2: DHCP IP mode
IP3: Auto IP mode (Default assigned network segment: 169.254.xxx.xxx)
Note: The IP mode can not be modified in Controller Box mode.
9, Fiber/Copper mode settings: After entering the configuration mode, press the UP/
DOWN button to enter the sixth page with “CPP/FIB” displaying on the LED screen
(CPP by default). Press and hold UP + DOWN buttons for 5 seconds, then release to
enter the settings mode, in which the Fiber/Copper mode (CPP/FIB) on the LED screen
will flash at 1Hz, then press the UP/DOWN button to select the mode, then press and
hold UP + DOWN buttons for 5 seconds to confirm the setting and stop flashing. After
setting, the unit will reboot automatically.
The corresponding Fiber/Copper mode options are as follows:
CPP: Copper mode
FIB: Fiber mode
10, Multicast mode settings: After entering the configuration mode, press the UP/
DOWN button to enter the seventh page with “CA1/CA2” displaying on the LED
screen (CA1 by default). Press and hold UP + DOWN buttons for 5 seconds, then
release to enter the settings mode, in which the multicast mode (CA1/CA2) on the
LED screen will flash at 1Hz, then press the UP/DOWN button to select the mode,
then press and hold UP + DOWN buttons for 5 seconds to confirm the setting and
stop flashing. After setting, the unit will reboot automatically.
The corresponding multicast mode options are as follows:
CA1: Unicast mode
CA2: Multicast mode
11, Audio return mode settings: After entering the configuration mode, press the UP/
DOWN button to enter the eighth page with “C2C/A2A” displaying on the LED screen
(C2C by default). Press and hold UP + DOWN buttons for 5 seconds, then release to
enter the settings mode, in which the audio return mode (C2C/A2A) on the LED screen
will flash at 1Hz, then press the UP/DOWN button to select the mode, then press and
hold UP + DOWN buttons for 5 seconds to confirm the setting and stop flashing. After
setting, the unit will reboot automatically.
The corresponding audio return mode options are as follows:
JPEG2000 AVoIP Encoder and Decoder
Bekijk gratis de handleiding van Vivolink VLVWIP2000-DEC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vivolink |
| Model | VLVWIP2000-DEC |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1508 MB |
