Vivolink VLVWIP2000-DEC handleiding
Handleiding
Je bekijkt pagina 14 van 34
8 / 27
EDID ID EDID Description
E00 1080P_Stereo_Audio_2.0_SDR
E01
E02
E03
E04
E05
E06
1080P_DolbyDTS_5.1_SDR
1080P_HD_Audio_7.1_SDR
1080I_Stereo_Audio_2.0_SDR
1080I_HD_Audio_7.1_SDR
1080I_DolbyDTS_5.1_SDR
E07
E08
3D_Stereo_Audio_2.0_SDR
3D_DolbyDTS_5.1_SDR
3D_HD_Audio_7.1_SDR
E09
E10
E11
4K2K30_444_Stereo_Audio_2.0_SDR
4K2K30_444_DolbyDTS_5.1_SDR
4K2K30_444_HD_Audio_7.1_SDR
EDID ID EDID Description
E12 4K2K60_420_Stereo_Audio_2.0_SDR
E13
E14
E15
E16
E17
E18
4K2K60_420_DolbyDTS_5.1_SDR
4K2K60_420_HD_Audio_7.1_SDR
4K2K60_444_Stereo_Audio_2.0_SDR
4K2K60_444_HD_Audio_7.1_SDR
4K2K60_444_DolbyDTS_5.1_SDR
E19
E20
4K2K60_444_Stereo_Audio_2.0_HDR_10-bit
4K2K60_444_DolbyDTS_5.1_HDR_10-bit
4K2K60_444_HD_Audio_7.1_HDR_10-bit
E21
E22
E23
DVI_1280x1024
DVI_1920x1080
DVI_1920x1200
6, IR mode settings: After entering the configuration mode, press the UP/DOWN button
to enter the third page with “IR2” (in which “IR” refers to IR and “2” to 12V) displaying
on the LED screen (IR2 by default). Press and hold UP + DOWN buttons for 5 seconds,
then release to enter the settings mode, in which the IR mode (IR1 or IR2) on the LED
screen will flash at 1Hz, then press the UP/DOWN button to select the IR mode, then
press and hold UP + DOWN buttons for 5 seconds to confirm the setting and stop
flashing.
The corresponding IR mode options are as follows:
IR1: 5V IR wire
IR2: 12V IR wire
7, Audio embedding mode settings: After entering the configuration mode, press the
UP/DOWN button to enter the fourth page with “HDI/ANA” displaying on the LED
screen (HDI by default). Press and hold UP + DOWN buttons for 5 seconds, then
release to enter the settings mode, in which the audio return mode (HDI/ANA) on the
LED screen will flash at 1Hz, then press the UP/DOWN button to select the mode,
then press and hold UP + DOWN buttons for 5 seconds to confirm the setting and
stop flashing.
The corresponding audio embedding mode options are as follows:
HDI: HDMI audio embedding
ANA: Analog audio embedding
Note: In point to point connection mode, before using the EDID copy function, all codecs
need to be set to CA1 unicast mode, and after setting, the HDMI cable of the Decoder
needs to be re-plugged to report the EDID of TV to the Encoder.
JPEG2000 AVoIP Encoder and Decoder
Bekijk gratis de handleiding van Vivolink VLVWIP2000-DEC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vivolink |
| Model | VLVWIP2000-DEC |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1508 MB |
