Vivolink VLVWIP2000-CTL handleiding
Handleiding
Je bekijkt pagina 25 van 44
Remove: Click the Remove button to remove the Encoder from the system.
Remove All: Click this button to remove all Encoders from the system.
Factory Reset: Click this button to restore the Encoder to factory settings.
Reboot: Click the Reboot button to reboot the Encoder.
Replace: Click to replace the offline Encoder (which is in the system) with
an online Encoder (which is not in the system).
For example, follow steps below to replace Encoder 001 with Encoder 006:
Step 1. Unplug the network cable of Encoder 001 to make it be offline.
(Using external power supply.)
Step 2. Connect Encoder 006 to the system.
Step 3. Click the Replace button, which is clickable after Encoder 001 is set
to be offline. Then a window will pop up, as shown below. At this moment,
click “Scan for Devices” to search devices. After Encoder 006 is searched,
select it and click “Replace” to replace Encoder 001.
19/37
Encoder Discovered (169.254.10.7)
JPEG2000 AVoIP Controller
Bekijk gratis de handleiding van Vivolink VLVWIP2000-CTL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vivolink |
| Model | VLVWIP2000-CTL |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4456 MB |
