Vivolink VLVWIP2000-CTL handleiding
Handleiding
Je bekijkt pagina 24 van 44
18/37
RS-232 Settings
① RS-232 Command Relay: Click the drop-down menu to select On/Off to
turn on/off the RS-232 command relay function.
② Parity: Click the drop-down menu to set the parity.
③ Baud Rate: Click the drop-down menu to set the baud rate.
④ Data Bits: Click the drop-down menu to set the data bits.
⑤ Stop Bits: Click the drop-down menu to set the stop bits.
After setting, click “Apply” to take effect.
Port Settings
① IR Voltage: Click the drop-down menu to select the 5V/12V IR voltage.
② IO Voltage: Click the drop-down menu to select the 5V/12V IO voltage.
③ IO 1 Direction: Click the drop-down menu to set the IO 1 direction (Input/
Output).
④ IO 1: Click the drop-down menu to set the IO 1 level (Low/High).
⑤ IO 2 Direction: Click the drop-down menu to set the IO 2 direction (Input/
Output).
⑥ IO 2: Click the drop-down menu to set the IO 2 level (Low/High).
⑦ Relay 1: Click the drop-down menu to select Open/Close Relay 1.
⑧ Relay 2: Click the drop-down menu to select Open/Close Relay 2.
JPEG2000 AVoIP Controller
Bekijk gratis de handleiding van Vivolink VLVWIP2000-CTL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vivolink |
| Model | VLVWIP2000-CTL |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4456 MB |
