Vimar 01532 handleiding

Niet gecategoriseerd

Vimar

74 pagina's

PDF beschikbaar

Handleiding

BUILDING AUTOMATION

4.5.1.3 Parameter window “Cx: Scene”

The parameter window “Cx: Scene” setting interface is shown in Figure 4.17. The main setting scene is here. Each scene can be set with 8 scenes at the

same time. Different scenes can define different louver positions and louver angles.

Fig. 4.17 Parameter window “Cx: Scene”

Parameter “Overwrite scene stored values during download”

This parameter sets whether to override the scene save value during application download. Options:

Disable

Enable

Disable: During the application download, the saved scene values are not overwritten by the parameter setting scene. When the scene is called, the scene

saved before the download is still enabled until it is replaced by the new storage scene.

Enable: During the application download, the saved scene values will be overwritten by the parameter setting scene. When the scene is called, the scene

will be set according to the parameters until it is replaced by the new storage scene.

Parameter “Channel is assigned to (1...64 ,0= no assignment)”

The shutter actuator can be assigned 64 different scene numbers per output. Each output can be set to 8 different scenes at the same time. Options:

Scene 1... Scene 64

0=no assignment

Note: The effective scene number in the parameter setting option is 1~64, and the corresponding message is 0~63. When the bus is powered

off, the new scene will be saved and when it is powered up again, the new scene will be called.

• Parameter “Shutter position: 0…100%(0%=top,100%=bottom)”

This parameter sets the position of the blind when the scene is called: 0…100%, 0%=top, 100%=bottom

• Parameter “Slat position: 0…100%(0%=opened,100%=closed)”

This parameter sets the angular position of the louver when the scene is called: 0…100%, 0%=opened, 100%=closed

Parameter setting description in the ETS

Bekijk gratis de handleiding van Vimar 01532, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.