Vimar 01532 handleiding

Niet gecategoriseerd

Vimar

74 pagina's

PDF beschikbaar

Handleiding

BUILDING AUTOMATION

Parameter “Duration of slat adjustments [10…250]*10ms”

This parameter sets the Shutter angle adjustment time, that is, the time when the louver angle is adjusted when a command to adjust the angle up or

down is received. The shorter the time, the more accurate the angle is adjusted.

After the shutter moves up, the shutter angle is usually open. If the shutter is lowered now, the louver angle is first closed and then the shutter moves

downward. If the blinds are now rising again, the louver angle first opens and then rises. (As shown below)

Blind

raised

Blind

lowered

Parameter “Total travel time of slat 0…100% in [10…250]*10ms”

Here shutter angle adjustment is provided from the fully closed state to the fully opened state of the overall travel time required, the current position of

the shutter during angular adjustment is determined by this parameter. Therefore, it is very important to measure and set the total travel time of the shut-

ter adjustment as accurately as possible. Especially in the case of “Slat position via a 1 byte value” and “Status response”, the only way to accurately

calculate the current position of the louver is.

When the louver angle is adjusted by the object “Slat adj./Stop”, the maximum number of times the louver angle needs to be adjusted from the fully closed

state to the fully open state = the total travel time of the louver angle adjustment / the one adjustment time. The adjustment time of one time is set by the

previous parameter. The shorter the set time, the more the adjustment will be, and the more accurate the angle.

Parameter “Pause on change in direction [5…255]*20ms”

This parameter is used to set the time to pause when the direction of movement or angle adjustment is changed. The pause time when the direction is

changed needs to be considered in conjunction with the technical data provided by the manufacturer of the drive unit to obtain an appropriate value.

Steering can prevent the blind drive from damaging when it suddenly changes direction, extending the life of the drive.

Parameter setting description in the ETS

Bekijk gratis de handleiding van Vimar 01532, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.