Vimar 01532 handleiding
Handleiding
Je bekijkt pagina 13 van 74
13
BUILDING AUTOMATION
Parameter “Special function of channel ”
This parameter defines whether enable the special functions of the switch actuator, The parameter setting interface “Ox: Function” will be seen when select “En-
able”, and able to set the special functions individually in Fig. 4.4. Options:
Disable
Enable
Fig. 4.4 Special function enable setting interface “Ox: Function”
4.3.2 Parameter window “Ox: Time”
This parameter window is visible when selecting “enable” in the parameter “Function of ‘time’” in the window “Ox: Function” shown in Fig. 4.4. See Fig. 4.5. And
the object “enable time function” will be also visible, which is used to disable the time function. After disabled, previous operation is still carried out completely.
Such as delay switch on, the function is disabled during delay, and then the switch is still switched on once the delay has been finished.
Fig. 4.5 Parameter window “Ox: Time-Delay”
Parameter “Type of time function”
The parameter defines the type of the time function, there are three options for the mode of work. Options:
Delay
Flashing
Staircase
4.3.2.1 Selection “Delay”
The parameter window “Ox: Time-Delay” setting interface in Fig. 4.5 will be shown when selecting “Delay”. The delay switch can be started via the object
“Delay function”.
Parameter “Delay for switch on: (0...240 min)/ (0...59 s)”
This parameter defines the delay time of switching on. Options:
0…240 Minutes
0…59 Seconds
Setting the delay time to switch off when object receive the control telegram..
Parameter setting description in the ETS
Bekijk gratis de handleiding van Vimar 01532, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vimar |
| Model | 01532 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15582 MB |
