VigilLink VLKV-H2041M handleiding
Handleiding
Je bekijkt pagina 22 van 31
19/28
⑤ Aspect: Click “Full Screen” or “16:9” to switch the display aspect.
Only the following modes are available: PBP(1)-PBP(2)-Triple(1)-Triple(2)
-Quad(2)
.
⑥ Auto Switch: Enable or disable the function of automatically
switching input signal source, available only in Single mode.
⑦ Output Setting: Set the output resolution, video keep alive,
PC/Video PQ, HDCP, audio source and audio output volume.
■ System Page
You can do the following operations on the System page:
① EDID Mode Control: Click the drop-down list on the right to select EDID
mode.
② Firmware Upgrade: Click the folder icon on the right to import the
firmware upgrade file, then click “Upgrade” to start upgrade. There will
be a progress bar prompt during the upgrade process. When the
progress bar
reaches 100%, it indicates the upgrade is successful, and the device will be
restarted automatically.
③ Factory Reset: Click “Reset” to reset the device to factory default settings.
④ System Reboot: Click “Reboot” to reboot the device.
Bekijk gratis de handleiding van VigilLink VLKV-H2041M, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | VigilLink |
| Model | VLKV-H2041M |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3538 MB |
