VigilLink VLDT-AP0808 handleiding
Handleiding
Je bekijkt pagina 8 van 39
- 6 / 37 -
5.2 Volume Meter
The volume meter is typically to denote the signal level of the I/O volume.
The meter has 3 colors (Red, Yellow and Green) to denote signal levels for the volume of
8-ch inputs and 8-ch outputs, in which the Red denotes that volume may be too high to
be limited and the yellow indicates the volume is within a reasonable range.
5.3 Input Settings
As shown below, clicking the INPUT module on the HOME page or the IN tab on
the menu bar, you will enter the INPUT setting page.
The following figure shows the details of the INPUT setting page.
GAIN CONTROL: Indicates the GAIN level of the input signal, which could be adjusted to
ensure the gain on the input channel adaptable to the MIC or linear input.
INVERT: When pressed, inverts the polarity of the signal on the input channel.
PHANTOM: When pressed, turns on 48V phantom power for the channel.
MUTE: When pressed, mutes the input channel, equivalent to clicking the letter M at the
INPUT module on the HOME page.
WHITE: When pressed, generates white noise for signal testing.
PINK: When pressed, generates pink noise for signal testing.
SINE: When pressed, generates sinusoidal signal for testing, the meter below shows the
frequency of the sine wave.
FADER: Controls the signal level of the testing signal.
Bekijk gratis de handleiding van VigilLink VLDT-AP0808, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | VigilLink |
| Model | VLDT-AP0808 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6379 MB |
