VigilLink VLDT-AP0808 handleiding
Handleiding
Je bekijkt pagina 15 van 39
- 13 / 37 -
The figure as below shows the setting page of the Auto Mixer module.
AUTO: Click AUTO to add the corresponding input MIC to the auto mixing system. Then
you can use the fader of the MIC input channel to adjust its signal level for controlling the
mixed volume on the input channel, or click MUTE to mute the MIC input channel.
PR (Priority): Sets the priority of the MIC input, 0 = lowest and 10 = highest priority. Channel
of higher-priority will override the one of lower-priority to be prioritized in the auto mixer’s
algorithm. If two or more channels are at the same priority, the channel for the main speaker
will be prioritized in the AUTO MIXER process.
Besides, the meter of OUTPUT indicates the output volume after the AUTO MIXER process.
And you can use the fader to control the output volume after the AUTO MIXER process.
5.9 Adaptive Feedback Cancellation
The Adaptive Feedback Cancellation (AFC, also known as the Feed Back Suppression)
module can detect and suppress the frequency point of the acoustic feedback in the audio
field. The AFC module allows you to detect and suppress the frequency points of the
acoustic feedback for 16 bands. Parameters on this module are open to be configured.
As shown below, by clicking the AFC module on the HOME page or the AFC tab on
the menu bar, you will enter the setting page of the AFC module.
Bekijk gratis de handleiding van VigilLink VLDT-AP0808, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | VigilLink |
| Model | VLDT-AP0808 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6379 MB |
