VigilLink VLDT-AP0808 handleiding
Handleiding
Je bekijkt pagina 12 van 39
- 10 / 37 -
or
The figure as below shows the setting page of the compressor.
THRESHOLD: The level that the signal above it will be compressed, with a scale of
[-60.0, 0.0]dB.
RATIO: The compression ratio for signals with level above threshold, with a scale of
[1.0, 20.0]. When the ratio sets to 2.0, it means that the signal with level below threshold
will be reduced to ½ of the original.
KNEE: The curve setting of the inflection point of the compressor, with a scale of [0.0, 20.0].
0 indicates a hard knee; other values for a soft knee.
ATTACK: The time required by the compressor to begin the Compressor process once a
signal is over threshold, with a scale of [1, 500] ms.
RELEASE: The time required by the compressor to stop the Compressor process once a
signal drops below threshold, with a scale of [1, 10000] ms.
MAKEUP GAIN: Since compressor can reduce the gain level, the Makeup Gain gives you
the option to make a compensation for the gain level, with a scale of [-12.0, +18.0] dB.
G.R. (Gain Reduction): Indicates the amount of gain attenuation of the input signal (in dB).
OUT: Meter indicates the output signal level after the Compressor process.
ACTIVE: Activates the COMP process. The function is equivalent to clicking the letter A at
the COMP module on the HOME page.
Bekijk gratis de handleiding van VigilLink VLDT-AP0808, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | VigilLink |
| Model | VLDT-AP0808 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6379 MB |
