VigilLink VLDT-AP0808 handleiding
Handleiding
Je bekijkt pagina 11 van 39
- 9 / 37 -
The figure below shows the setting page of the EQ module.
TYPE: Provides 5 types of band/filter, with H-Pass, L-Pass, H-Shelf, L-Shelf and Peaking
optional.
FREQUENCY : In High/Low Pass Filter, it means the cut-off frequency of the EQ band;
In Peak Filter, it means the center frequency point of the EQ band; with a scale of
[20, 20000] Hz.
GAIN: In High/Low Pass Filter, fixed to 0dB; In Peak Filter, squashed between
[-24.0, +18.0] dB.
Q FACTOR: Value is squashed between [0.02, 50.00].
ON/OFF switch: Each band has a switch. When pressed, the EQ function in this band will
be disabled.
ACTIVE: Activates the EQ process. The function is equivalent to clicking the letter A at
the EQ module on the HOME page.
A pair of UP-DOWN arrows on the right panel is provided for you to select an input channel
for the Equalizer configuration.
5.6 Compressor
The Compressor is used to reduce the dynamic range of the signal above a user determined
threshold so that output sounds could be more solider.
As shown below, click the COMP module on the HOME page or the COMP button
on the right panel of the IN page, you will enter the Compressor setting page.
Bekijk gratis de handleiding van VigilLink VLDT-AP0808, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | VigilLink |
| Model | VLDT-AP0808 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6379 MB |
