Victron Energy EV Charging Station NS handleiding
Handleiding
Je bekijkt pagina 20 van 38
5.3. The main page
The main page of the web interface provides control and monitoring elements for the EV Charging Station NS. These are from top
to bottom:
• Charging mode switch: Change the charging mode to manual, auto or scheduled.
• Charging current slider: Adjust the charging current.
• Start/Stop button: Start or stop charging when in manual mode.
Note that after pressing the stop button, first the charging current is reduced to a minimum and only then the contactor opens
(with a delay of 2 seconds).
• Session statistics and an animated graphical overview to see the charging progress at a glance.
5.3.1. Charging mode switch in detail
The Charging mode switch is located on the main screen and provides three different operation modes:
• Manual mode: Enables the user to turn the vehicle charging ON and OFF manually, using the START STOP button. The
amount of current the station provides, can be changed using the Charging current slider.
• Automatic mode: The system will determine all the settings for the user. Similar to a GX device, the screen shows how the
current is flowing. A GX device such as the Cerbo GX or Color Control GX must be included in the system for this operation
mode to work. There are a variety of settings that can be changed directly from the GX device related to either manual or
automatic mode. One can see the device, its summary as well as more advanced power graphs on the main dashboard of the
VRM Portal.
• Scheduled mode: Charge the EV at certain time intervals, for example during the night hours when grid energy is cheaper.
The manual and automatic modes ensure the best use of the charging station.
The charging mode can be changed via:
• The main web page
• A GX device
• The VRM Portal (requires a GX device in the system)
• Bluetooth and VictronConnect.
The manual mode gives flexibility in choice and charges the car independently of PV production. By manually determining how
much power goes into a vehicle charge, you can make allowances for other loads in your home.
The automatic mode ensures maximum efficiency of the PV system and charges excess PV power to the EV before it is fed into
the grid.
When the EV Charging Station NS is connected to a Victron system and is in automatic mode, the excess solar power can be
used to charge the vehicle instead of, for example, feeding it into the grid at a lower price.
Manual - EV Charging Station NS
Page 17 Setup
Bekijk gratis de handleiding van Victron Energy EV Charging Station NS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Victron Energy |
| Model | EV Charging Station NS |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4132 MB |