Vevor PL-80M handleiding
Handleiding
Je bekijkt pagina 7 van 80
- 5 -
Do NOT connect it to a different part of the car body.
Ensure the metal has been properly stripped at the connection point.
● Strip the area where the metal is to be worked.
● Attach the required tool to the end of the gun, tightening the nut firmly.
● Select the tool and the power level(see"Operating and Setting")on the
machine
● Make contact between the tool on gun and the metal
● Generate your welding arc.
PL-80M
Overheat Protection System
This machine is equipped with an automatic overheat protection system,
and this system can automatically stop the machine from operating for a
few minutes in the case of excessive use of the machine. In this case, the
buzzer will emit (hum...... hum...... hum...... ) sound.
Bekijk gratis de handleiding van Vevor PL-80M, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vevor |
| Model | PL-80M |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5353 MB |
