Vevor PL-80M handleiding
Handleiding
Je bekijkt pagina 8 van 80
- 6 -
Automatic Pulse System
This machine is equipped with an automatic pulse system with automatic
pulse function. For full contact welding tools and steel plate, the host
automatically detects the power link, then generates a point in 2 seconds,
change to programming welding mode, solid welding and joint, smaller
point, reduce the degree of carbonation, and improve work efficiency.
Safety Regulations and General Considerations
In any of the following circumstances, no liability shall be borne for the
damage to the personnel or goods caused by the use of the machine.
● The customer may modify the safety element by himself or prevent it
from running·
● Failure to comply with this instruction.
● Modify product performance.
● Use of non original parts or accessories.
● Do not comply with the country's special regulations and settings in
which the machine was installed.
Summary
● Disconnect the power supply before disconnecting the machine shell.
● The operator must be properly trained.
● The maintenance of the machine must be carried out by professionals.
● The operator has the responsibility to comply with the protection of the
electrical and electronic equipment (computer display panel, radio, alarm,
airbags etc.) The electrode, welding arm and other secondary conducting
physical can reach very high temperature and maintain long-term high
temperature after the operation, paying attention to the risk of burns.
● Need to ensure regular preventive maintenance.
Bekijk gratis de handleiding van Vevor PL-80M, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vevor |
| Model | PL-80M |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5353 MB |
