Vevor GQ-100D handleiding
Handleiding
Je bekijkt pagina 20 van 275
- 19 -
handle and put the switch to the OFF gear to make the machine stop turning.
(6) Pull the remaining springs and tools in the pipe out of the pipe.
4. Clean up the blockage wound around the spring and the tool. If dredging is
completed, remove the tool from the spring connector with a special key, and the
method of removing the tool is the same as the spring.
5. Clean and close the springs and tools.
Pay attention to: After use, please thoroughly clean and dredge the springs and
tools, and apply the lubricating oil after drying. Note: be sure to fill the pin gap of
the spring joint with pins.
SPECIAL OPERATING INSTRUCTIONS:
Reverse operation:
The machine switch knob is placed in CCW gear and the reverse machine may
cause damage to the spring, which is used to exit the tool and spring from the
block or pipe. Do not put the switch knob in the CCW gear to reverse the machine.
Quick removal
Slightly bending of the spring 6″ ~ 8″ behind the tool can quickly remove oil in the
pipe.
Dredge with spring bin with 3 / 8 " springs
1. Keep the correct posture to control your body balance.
Pay attention to:
If unexpected situations occur, the correct posture allows the operator to safely
control the machine and the springs
1. Draw a small spring from the machine to form a semi-circular arc between the
pipe and the machine.
2. Place the switch in the CW position, note that the machine rotates and the
spring does not rotate.
3. Press the upper part of the arc spring with the glove hand, then pull down the
clutch handle, maintain the appropriate clamping force, the spring begins to turn,
and will easily enter the pipe.
4. Release the clutch and pull out the spring, press the clutch handle, and
constantly slowly push the spring into the pipe with your hands. Repeat the above
Bekijk gratis de handleiding van Vevor GQ-100D, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vevor |
| Model | GQ-100D |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 49458 MB |
