Vevor 3 IN 1/305 handleiding
Handleiding
Je bekijkt pagina 12 van 207
- 10 -
3. Rotate adjustment screws (M, Figure 8)to shift table and change the
gap between blades. Do not allow the blades too verlap.
4. If the shear cuts the paper on the ends, but not the center, slightly turn
screw (N,Figure 9) clockwise until paper is cut the en tire length.
Figure 8
5. If the shear cuts the paper in the center, but not the ends, turn screw
(N)counterclockwise until paper is cut the entire length.
Figure 9
Blade Rotation/Replacement
Exercise caution when working with or near the blades. Use
work gloves when handling them.
The shearing blades are reversible and interchangeable; when the edges
dull, rotate them to the new edge, as follows:
1. Remove hold-down by loosening screws (O, Figure 10), using 10mm
hex key.
Bekijk gratis de handleiding van Vevor 3 IN 1/305, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vevor |
| Model | 3 IN 1/305 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 24980 MB |
