Vevor 28104-1 handleiding
Handleiding
Je bekijkt pagina 22 van 288
- 20 -
Step 4 -
Reposition the offset guide (A) Fig. P4 flush to the vertical
board and secure it.
Step 5 - Reposition the scrap board(A) Fig. P5 so that it is flush with
the rear edge of the vertical board (B).
Step 6- Align the template using the “tails/box” line (A) Fig. P6 with
the line formed where the scrap board (B) and the vertical
board meet (C) and secure it.
Step 7 - Mount the dovetail bit and 3/4" template guide on the router
and set the router bit depth .
Step 8 - Rout along the template fingers (Fig. P8). When the cut is
complete, remove the vertical board.
NOTE:
If you prefer for your pins to protrude slightly for easier
sanding, Adjust your router for a slightly deeper cut. Once your
optimum depth has been achieved, adjust the bit height
guide with a 3/8" wrench.
Bekijk gratis de handleiding van Vevor 28104-1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vevor |
| Model | 28104-1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 74655 MB |
