Vevor 234-2-31 handleiding
Handleiding
Je bekijkt pagina 13 van 128
4.Wind the springs.
Insert 2 winding bars into the winding cone so they are perpendicular to each
other. Use the bars to turn the spring % turn at a time, moving the bars to new
holes in the cone as necessary. Follow the supplier' s recommendation for the
number of turns to complete. Repeat on the other spring.
Note:
A: Generally, you' II need 30 quarter-turns for a 7 ft (2.1 m) tall door and 36
quarter-turns for an 8 ft (2.4 m) tall door.
B: Winding the spring too tight could cause it to break and injure you, so be sure
to follow the supplier' s recommendation and don' t over-wind the spring.
5. Stretch the springs out 1/4 inch (6.4mm).
When the spring is fully wound, leave 1 winding bar in a slot of the cone that is
perpendicular to the floor. Tap the winding bar with a hammer to stretch the spring
1/4 inch (6.4mm) out from the center. Repeat on the other side.
Bekijk gratis de handleiding van Vevor 234-2-31, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vevor |
| Model | 234-2-31 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 28308 MB |
