Vestil STAND-G-V handleiding
Handleiding
Je bekijkt pagina 5 van 9
Table of Contents 8/11/2023 STAND-G, MANUAL
Table of Contents Vestil Manufacturing Co. 2023 Page 5 of 9
3. With the pedal assembly in place (NOTE: The pedal lever should project radially away
from the receiver), install the narrower end of the hydraulic cylinder, i.e. the end with a
white plastic tip, into the receiver. The white tip should contact the upper side of the
foot pedal assembly. Loosen (unwind) the set screw so that it does not extend into the
opening of the receiver.
4. Once in place, slide the cylinder cover over the hydraulic cylinder. The top of the
hydraulic cylinder should project beyond the top of the cover when the cover is
installed.
5. Either use an Allen wrench or pliers to tighten the set screw and secure the cover in
place. Tighten the screw until it firmly presses against the side of the cylinder cover.
Pedal
lever
RECEIVER
Top of cylinder
Set
screw
Set
screw
Bekijk gratis de handleiding van Vestil STAND-G-V, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | STAND-G-V |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4926 MB |
