Vestil S-2CB-62 handleiding
Handleiding
Je bekijkt pagina 4 van 16
S-2CB, Manual.doc
Copyright 2015 Vestil Manufacturing Corp.
Page 4 of 16
Connect the sling to both hook points on the Mas
t (1
on ea
ch side
;
the pictur
e below
only shows the hook point
on the right side); then lift the unit no more than 6 – 8 inches above the pallet. The S-2CB will tilt towards the
control yoke. Additionally, it may swing from side-to-side once free of the pallet if you did not properly position the
hoist above the center of the sling. Stabilize the suspended truck with one hand, and stand safely to the side
while operating the hoist.
To remove the S-2CB from the shipping pallet using a hoist:
Hook Point
Bekijk gratis de handleiding van Vestil S-2CB-62, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | S-2CB-62 |
| Categorie | Vorkheftruck |
| Taal | Nederlands |
| Grootte | 2183 MB |
