Vestil S-2CB-62 handleiding
Handleiding
Je bekijkt pagina 5 van 16
S-2CB, Manual.doc
Copyright 2015 Vestil Manufacturing Corp.
Page 5 of 16
EMERGENCY STOP (“E-STOP”) BUTTON:
Press the E-stop button to
immediately interrupt all powered
functions. Use the E-stop during
operation if the travel or fork (raise
and lower) functions do not respond
normally to operator commands.
Use the E-stop as a service brake to secure the
S-2CB when parked.
FIG. 1: Function Controls, Gauges, and Safety Features
BELLY SWITCH:
The belly switch protects the operator from injury
while driving the EPT in reverse. When pressed, the
truck will change direction, i.e. move forward, for
approximately 3 seconds; after 3 seconds it will stop
completely. If the belly switch becomes jammed or
stuck, the stacker will move forward (away from the
operator) for at most 3 seconds; the control circuit will
remain disabled until reset.
To reset the circuit, either raise the ha
ndle to the
fully vertical position (or simply release the
handle), or press it downwards to the fully
horizontal position.
MOVEMENT CONTROLLERS:
To drive the S-2CB in the
forward direction, rotate the
movement control forward with
your thumbs as indicated by the
solid arrow superimposed on
photograph below. To move the
pallet truck in reverse
, rotate
the control wheel in the opposite
direction, which is shown with a
dashed arrow.
The degree of rotation determines the speed of
movement, so the farther you press the wheel in
either direction, the faster the S-2CB will travel, up to
a maximum speed of ~3.4mph
when unloaded or
~2.8mph when loaded to capacity. Simply by
releasing the movement control, the S-2CB will
decelerate to a complete stop.
BATTERY CHARGE GAUGE:
The battery charge gauge
indicates the status of the battery.
It is located on top of the EPT main
body and to the right of the control
yoke. As the battery discharges,
display lines disappear from right
to left.
A
lways check the gauge before
using the device; make sure that
the battery is charged before using
the
p
allet truck.
Reverse Forward
slow/fast speed switch
Handle
Raise Forks
Lower Forks
Movement Controllers
("Butterfly" Switches)
Belly Switch
(Emergency Stop)
Bekijk gratis de handleiding van Vestil S-2CB-62, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | S-2CB-62 |
| Categorie | Vorkheftruck |
| Taal | Nederlands |
| Grootte | 2183 MB |
