Vestil FHS-4-10 handleiding
Handleiding
Je bekijkt pagina 12 van 16
TABLE OF CONTENTS 6/15/2021 FHS MANUAL
TABLE OF CONTENTS Vestil Manufacturing Corp. Page 12 of 16
USING THE CRANE
Before using the crane for the first time, perform a BEFORE AND AFTER EACH USE inspection (see p. 14).
Crane operators are responsible for operating the crane in a safe manner. To reduce the
likelihood of serious personal injuries or death resulting as a consequence of negligent operation:
• ALWAYS apply safe material handling practices learned during your training program.
• Only trained, qualified crane operators should use this device. The operating instructions in this
manual supplement safe crane and hoist operation practices learned during your training program.
• All personnel not participating in crane use must stay out of the operating area during use. Be
certain no person or object is under any part of the beam) or the suspended load at any time and
particularly before lowering it. Instruct all persons to remain at a safe distance during operation.
• Always carefully watch the beam and any load hanging from it while using the crane.
• Always follow the hoist and trolley operation instructions.
• BEFORE the load is connected to the hoist, lock or immobilize the casters (for instance with chocks).
• DO NOT use the crane and notify your supervisor and maintenance personnel if: 1) you observe any
damage or hear unusual noise during operation; 2) if you observe any warping or deformation of the
beam, the uprights, the load hook or chain (or cable).
PROPER LOADING
Position the trolley and hoist directly above the load. Proper centering requires the operator to
center the trolley and hoist above the center of the load as well as to position the long axis of the I-
beam above the center of the load. Proper positioning is diagrammed below in Fig 6.
Connect the load to the hoist chain/cable by following the instructions supplied with your hoist and
the methods applied at your work site. Then raise the load only as high as is necessary to position it.
FIG. 6: Loading the crane
Side view: Properly centered hoist & trolley
Side view: Improperly centered hoist &
trolley
End view: Properly centered
Load
Load
Load
End view: Improperly centered
Bekijk gratis de handleiding van Vestil FHS-4-10, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | FHS-4-10 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3660 MB |
