Vestil FHS-4-10 handleiding
Handleiding
Je bekijkt pagina 13 van 16
TABLE OF CONTENTS 6/15/2021 FHS MANUAL
TABLE OF CONTENTS Vestil Manufacturing Corp. Page 13 of 16
Once the load is properly centered above the work location, lower the load until it is fully supported by
the ground or work surface. Disconnect the load from the hoist and return the crane and hoist to their
storage locations.
If you must move the load to a different location, return the load to the ground and disconnect it
from the hoist. Move the crane and load separately to the desired work location. Only use the crane to
lift loads.
FESTOON KIT (OPTION)
Item no. Part no. Description Quantity
2 28-016-169 Hold down plate 2
3 28-145-002 I-beam clamp 4
4 42234
3
/
8
in. -16 x 1in. turned eye bolt 2
5 33008
3
/
8
in. zinc-plated flat washer 2
6 36106
3
/
8
in. -16 zinc-plated hex nut 2
7 37030
1
/
2
in. – 13 nylon insert lock nut 4
8 11211
1
/
2
in. – 13 x 2 in. HHCS zinc-plated bolt 4
9 33012
1
/
2
in. zinc-plated USS flat washer 8
10 45503
1
/
8
in. wire rope (1 in. longer than 1-beam) 1
11 34785T4 Quick-grip wire rope clamp 2
12 CV200 Plastic cable tie 7
13 O-RING15 Metal ring 6
14 FCOIL 143-001 Coiled power cord 1
Bekijk gratis de handleiding van Vestil FHS-4-10, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | FHS-4-10 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3660 MB |
