Handleiding
Je bekijkt pagina 14 van 19
EN - 14
Simultaneous operation of and buttons
The corresponding heater must be chosen with
the Activate/Deactivate Heater Button
, the Decimal Point of the related Heater
Display will then flash. To switch off the heater,
and must be pressed simultaneously. A
buzzer will sound and “0” will appear in the heat
setting display when this is successful.
If the timer is active for the selected heater, then
“
0” will appear in the heater and timer displays,
and the related Cooking Zone Indicator and the
Timer Function will both switch off.
If there is any residual heat for the heater, this
will be indicated by a “H” in the heat setting
display.
Reduction of the heat setting to “0” by
operating button
The heater can also be switched off by reducing
the heat setting to “0”.This will cause the
associated Decimal Point of the heater, the
related Cooking Zone Indicator and the Timer
Display to all switch off, also.
If there is any residual heat for the heater, this
will be indicated by a “H” in the heat setting
display.
Use of the timer switch-off function for the
corresponding heater (if available)
After counting down to zero, the timer will stop,
the corresponding Heater Display will show “0”
and the Timer Display will read
'00'. The corresponding Cooking Zone Indicator
will disappear.
An assigned Dual/Triple Zone Selection Indicator
will also disappear if it is active.
Additionally, the buzzer will sound when the
timer stops. Pressing any button will silence the
timer.
Key Lock
The key lock function is used to set ‘safe mode’
on the appliance and can only be used in
Operating Mode (B-Mode). The lock function
becomes active when the key Lock button is
pressed for at least 2 seconds. This operation is
acknowledged by a buzzer and the Key Lock
Indicator will flash to indicate the heater is
locked.
If the heater is locked, it will only be possible to
switch the appliance off by pressing , all
other buttons are blocked and it will not be
possible to make any adjustments by pressing
the buttons. If any other button is pressed in the
lock mode,
the buzzer will sound and the Key Lock
Indicator will flash.
Only the switch-off operation by pressing
is possible. However, if the appliance is
switched off, it can not be restarted again
without being unlocked.
Child Lock
The child lock function is used to lock the
appliance in a complicated, multi-step process.
Child lock (and unlocking) is only available in
the S-Mode.
First, must be pressed until the buzzer
sounds, then and must be pressed
simultaneously for at least 0.5 seconds, but no
longer than 1 second. Following this, touch
to activate the child lock. All four heater
displays will show “L
” as confirmation.
If the minute minder timer is still running, it will
proceed until “00” is reached and the timer will
beep. After confirmation of timer completion,
the appliance will be fully locked. None of the
buttons can be used as long as the appliance is
locked.
Child lock can be deactivated in the same way
that it is activated. After pressing
a beep is heard, and have to be pressed
simultaneously for at least 0.5 seconds,
followed by pressing only. As
confirmation for successful unlocking, “L” will no
longer be displayed.
Touch Control Safety Functions
The following safety functions are available to
avoid unintended operations.
Sensor Safety Cut-Off
Bekijk gratis de handleiding van Vestel AO-6330 B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestel |
| Model | AO-6330 B |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 1221 MB |
